record telephone conversations by building this bugging equipment
No description available.
Kodiak Military History Fire Control Telephones
The EE-91 is a wall-mounted metal telephone box. It is a common battery phone, meaning the transmitter current is sourced from the central office battery. It features a single gong ringer and is equipped with a hand generator for signaling...
Gain-Controlled Amplifier
This single-chip circuit adjusts its audio gain according to the ambient noise picked up by the microphone. When operating in a quiet environment, the audio output is quiet, while a noisy environment results in a louder audio output. Audio to...
3170 IC For Telephone Remote Control Circuit
This circuit below shows a teleremote circuit that enables the switching on and off of appliances through telephone lines.
The teleremote circuit utilizes a telephone line as a medium for controlling electrical appliances from a distance. The primary components of...
PHONE RING REMOTE CONTROL
A repeater or other unattended equipment can be activated or deactivated using a standard telephone. The process involves calling the remote station, allowing it to ring three times, hanging up, waiting for 20 seconds, redialing the number, and letting it...
Transmitting Audio Streams in Automotive Applications Using the MAX9205/MAX9206 LVDS SerDes
This application note outlines the transmission of I²S audio data streams between two audio components using a single shielded twisted-pair (STP) wire, employing the MAX9205 10-bit LVDS serializer and the MAX9206 10-bit LVDS deserializer. Low-voltage differential signaling (LVDS) serves as...
Audio remote control switch schematic
Each issue produces a specific frequency of sound, and the audio remote control will switch states based on these frequencies. The circuit is designed to detect other frequencies emitted by environmental sounds with strong anti-interference capabilities. The circuit operates on...
High-power car audio amplifier Electronics Audio-Circuits
The circuit is a high-power car audio amplifier schematic. It functions as a car audio amplifier using the PA02 and LH0101 integrated circuits (ICs). Each IC delivers an output power of 30W with an 8-ohm impedance. The part list includes...
Audio Line Driver
The preamplifier described is engineered with a low output impedance, specifically designed to handle long cable runs. This feature allows for listening to a remote music source without the need for expensive screened cables. The preamplifier boasts a very low...
Audio mV Meter
This project is an Audio Millivolt Meter designed to measure small audio signals from various equipment and circuits. The circuit features a four-step attenuator at the input, providing ranges of 10mV, 100mV, 1V, and 10V. The gain stage amplifies the...