16v power supply with MAX668 circuit
#MAX668
#16V
#voltage regulator
#DC power
#power management
#step-up converter
#buck-boost
#electronic design
#circuit schematic
#power electronics
No description available.
SciTech PS-3R Power Supply Circuit
The following circuit illustrates the SciTech PS-3R Power Supply Circuit. Features include 13.8V DC output, 5 Amps surge capability, and a constant output of 3 Amps. Components include a transistor and others.
The SciTech PS-3R Power Supply Circuit is designed to...
PC Power Box with E fuse
This circuit helps eliminate surplus small AC mains adapters from a desktop. It is a practical DC power supply box powered directly by the SMPS of a desktop PC. The output provides regulated, clean, and protected +12VDC. Additionally, a USB...
200mA Buck-Boost Synchronous DC/DC Converters
The LTC3531, LTC3531-3.3, and LTC3531-3 are synchronous buck-boost DC/DC converters that function with input voltages that can be above, below, or equal to the output voltage. The topology utilized in these integrated circuits (ICs) enables continuous power transfer across all...
9 Volt 2 Amp Power Supply
This circuit primarily relies on the regulator for its functionality. The 78S09 regulator can provide a continuous output of up to 2 amps while ensuring a low noise and well-regulated supply. Although the circuit can operate without additional components, a...
Three-terminal voltage regulator integrated fixed a typical wiring circuit
A fixed three-terminal integrated voltage regulator can be directly employed in various electronic devices as a voltage regulator. It features internal protections such as overcurrent protection, thermal protection, and safe operating area protection, making the circuit easy to use, safe,...
ISL6528 Dual Regulator-Standard Buck PWM and Linear Power Controller
The ISL6528 offers power control and protection for two output voltages in high-performance graphics cards and other embedded processor applications. This dual-output controller drives an N-Channel MOSFET in a standard buck topology and an NPN pass transistor in a linear...
90Vrms voltage regulator
The circuit is an open-loop RMS voltage regulator designed to deliver 500 watts of power at 90 V RMS, maintaining good regulation within an input voltage range of 110-130 V RMS. When the input voltage is applied, capacitor C1 charges...
STABILIZER POWER SUPPLY 0-30 VDC CIRCUIT
This is an aerial current power supply with a continuously adjustable stabilized output ranging from 0 to 30VDC. The circuit also incorporates an electronic current limiter that effectively controls the output current from a few milliamperes (2 mA) to a...
Power supply +20V/15A and +12V/3A
The circuit is based on application of National Semiconductor. First is constituted by three voltage regulators LM338 [IC1-2-3] connected in parallel. The each one regulator has the possibility of giving 5 A in his output. Also exists the possibility to...